WPANTSMLT321612A
Datasheet (PDF)
| Style: |
Chip Style |
| Frequency: |
2.4 – 2.485 GHz |
| Efficiency: |
35% |
| Peak Gain: |
2.3 dBi |
| Polarization: |
Linear |
| Antenna Size: |
3.2mm X 1.6mm X 1.2mm |
| Price & Application Support: |
Contact Sales |
Surface Mount LTCC Ceramic Antenna for Bluetooth, W-Fi, ZigBee applications.
WPANTSMLT602012A
Datasheet (PDF)
| Style: |
Chip Style |
| Frequency: |
2.4 – 2.485 GHz |
| Efficiency: |
40% |
| Peak Gain: |
3.5 dBi |
| Polarization: |
Linear |
| Antenna Size: |
6mm X 2mm X 1.2mm |
| Price & Application Support: |
Contact Sales |
Surface Mount LTCC Ceramic Antenna for Bluetooth, W-Fi, ZigBee applications.
WPANTSMLT903012A
Datasheet (PDF)
| Style: |
Chip Style |
| Frequency: |
2.4 – 2.485 GHz |
| Efficiency: |
45% |
| Peak Gain: |
3.5 dBi |
| Polarization: |
Linear |
| Antenna Size: |
9mm X 3mm X 1.2mm |
| Price & Application Support: |
Contact Sales |
Surface Mount LTCC Ceramic Antenna for Bluetooth, W-Fi, ZigBee applications.
WPANTSMLT1103012A
Datasheet (PDF)
| Style: |
Chip Style |
| Frequency: |
2.4 – 2.485 GHz |
| Efficiency: |
50% |
| Peak Gain: |
4 dBi |
| Polarization: |
Linear |
| Antenna Size: |
11mm X 3mm X 1.2mm |
| Price & Application Support: |
Contact Sales |
Surface Mount LTCC Ceramic Antenna for Bluetooth, W-Fi, ZigBee applications.
WPANTSMCER402012A
Datasheet (PDF)
| Style: |
Chip Style PIFA |
| Frequency: |
2.4 – 2.485 GHz |
| Efficiency: |
50% |
| Peak Gain: |
2.9 dBi |
| Polarization: |
Linear |
| Antenna Size: |
4mm X 2mm X 1.2mm |
| Price & Application Support: |
Contact Sales |
Surface Mount Ceramic Antenna for Wi-Fi, WLAN, Zigbee & Bluetooth.
WPANTSMCER100303A
Datasheet (PDF)
| Style: |
Chip Style PIFA |
| Frequency: |
2.4 – 2.485 GHz, 5.15 – 5.875 GHz |
| Efficiency: |
60% (2.45 GHz), 65% (5.4 GHz) |
| Peak Gain: |
3.3 dBi (2.45 GHz), 3.75 dBi (5.4 GHz) |
| Polarization: |
Linear |
| Antenna Size: |
10mm X 3mm X 3mm |
| Price & Application Support: |
Contact Sales |
Surface Mount Ceramic Antenna for Dual-band Wi-Fi, WLAN, Zigbee & Bluetooth.
WPANT10001-SB
Datasheet (PDF)
| Style: |
SMD Chip style |
| Frequency: |
2.4 – 2.5 GHz |
| Efficiency: |
60 – 70% |
| Peak Gain: |
2.5 – 3.5 dBi |
| Antenna Size: |
13mm X 4.5mm X 0.8mm |
| Minimum Ground-plane Size required: |
35 – 40mm |
| Antenna Position on Board: |
Along the Board Edges |
| Price & Application Support: |
Contact Sales |
Low cost, small size, the ground-plane size requirement is very small, and the performance is very good for a chip antenna this size.
WPANT10002-SB
Datasheet (PDF)
| Style: |
SMD Chip style |
| Frequency: |
2.4 – 2.5 GHz |
| Efficiency: |
60 – 70% |
| Peak Gain: |
2.0 – 3.0 dBi |
| Antenna Size: |
13mm X 5mm X 0.8mm |
| Minimum Ground-plane Size required: |
35 – 40mm |
| Antenna Position on Board: |
Along the Board Edges (board layout differs from WPANT10001-SB Antenna) |
| Price & Application Support: |
Contact Sales |
Low cost, small size, the ground-plane size requirement is very small, and the performance is very good for a chip antenna this size.
WPANT10005-SB
Datasheet (PDF)
| Style: |
SMD Chip style |
| Frequency: |
2.4 – 2.5 GHz & 4.9 – 5.9 GHz |
| Efficiency: |
75% (2.45 GHz), 60 – 75% (5.4 GHz) |
| Peak Gain: |
3.0 dBi (2.4 GHz), 3 – 6 dBi (5.4 GHz) |
| Antenna Size: |
10.8mm X 8mm X 0.8mm |
| Minimum Ground-plane Size required: |
40 – 45mm |
| Antenna Position on Board: |
Along the Board Edge & Corner |
| Price & Application Support: |
Contact Sales |
Extremely Efficient Dual band operation, Low cost & small size, combined with the ease of integration makes this antenna an ideal choice for applications that desire an Antenna where the performance requirements are very stringent.
WPANT10004-SB
Datasheet (PDF)
| Style: |
SMD Chip style |
| Frequency: |
2.4 – 2.5 GHz & 4.9 – 5.9 GHz |
| Efficiency: |
65 – 70% (2.45 GHz), 50 – 80% (5.4 GHz) |
| Peak Gain: |
2.0 dBi (2.4 GHz), 5.5 dBi (5.4 GHz) |
| Antenna Size: |
13.3mm X 6mm X 0.8mm |
| Minimum Ground-plane Size required: |
35 – 40mm |
| Antenna Position on Board: |
Along the Board Edges |
| Price & Application Support: |
Contact Sales |
Dual band operation, low cost, small size, the ground-plane size requirement is very small and the performance is very good for a chip antenna this size.
WPANT10018-CA
Datasheet (PDF)
| Style: |
Flex or FPCB |
| Frequency: |
2.4 – 2.5 GHz |
| Efficiency: |
40 -50% |
| Peak Gain: |
0.5 – 1 dBi |
| Antenna Size: |
20mm X 6.7mm X 0.2mm |
| Minimum Ground-plane Size required: |
10 – 15mm |
| Antenna Position on Board: |
Along the Board Edge |
| Price & Application Support: |
Contact Sales |
Flexible and thin antenna that can be pasted to any surface (non metal). The Antenna should be soldered to a 50 Ohm line on the PCB.
WPANT10007-SA
Datasheet (PDF)
| Style: |
Stamped Metal PIFA |
| Frequency: |
2.4 – 2.5 GHz & 4.9 – 5.9 GHz |
| Efficiency: |
80 – 90% (2.45 GHz), 55 – 80% (5.4 GHz) |
| Peak Gain: |
2.5 dBi (2.4 GHz), 4 – 5 dBi (5.4 GHz) |
| Antenna Size: |
27.5mm X 8mm X 3.5mm |
| Minimum Ground-plane Size required: |
45 – 55mm |
| Antenna Position on Board: |
Along the Board Edge |
| Price & Application Support: |
Contact Sales |
Extremely Efficient Dual band operation. This is a simple drop in place antenna for any printed circuit board.
WPANT10008-SA
Datasheet (PDF)
| Style: |
Stamped Metal PIFA |
| Frequency: |
2.4 – 2.5 GHz & 4.9 – 5.9 GHz |
| Efficiency: |
70 – 80% (2.45 GHz), 50 – 80% (5.4 GHz) |
| Peak Gain: |
1.5 dBi (2.4 GHz), 3 – 5.5 dBi (5.4 GHz) |
| Antenna Size: |
21mm X 9mm X 6mm |
| Cable Length: |
200mm (7.87 inches) |
| Connector: |
IPEX / Hiroshe equivalent |
| Application: |
Is designed to work mainly on Metal Surfaces |
| Price & Application Support: |
Contact Sales |
Extremely Efficient Dual band operation. It comes with a cable and IPEX / Hiroshe connector and the antenna can adhere to any given surface.
WPANT10021-SA
Datasheet (PDF)
| Style: |
Flat surface, low profile & standalone |
| Frequency: |
2.4 – 2.5 GHz & 4.9 – 5.9 GHz |
| Efficiency: |
60 – 70% (2.45 GHz), 65 – 85% (5.4 GHz) |
| Peak Gain: |
3 – 3.5 dBi (2.4 GHz), 0 – 2 dBi (5.4 GHz) |
| Antenna Size: |
40mm X 25mm X 0.8mm |
| Cable Length: |
170mm (6.69 inches) |
| Connector: |
IPEX / Hiroshe equivalent |
| Price & Application Support: |
Contact Sales |
This is a stand-alone antenna that can be positioned inside any wireless device.
WPANT10017-SA
Datasheet (PDF)
| Style: |
Flat surface, low profile & standalone |
| Frequency: |
2.4 – 2.5 GHz & 4.9 – 5.9 GHz |
| Efficiency: |
60 – 70% (2.45 GHz), 65 – 85% (5.4 GHz) |
| Peak Gain: |
3 – 3.5 dBi (2.4 GHz), 0 – 2 dBi (5.4 GHz) |
| Antenna Size: |
40mm X 25mm X 0.8mm |
| Cable Length: |
413mm (16.25 inches) |
| Connector: |
IPEX / Hiroshe equivalent |
| Price & Application Support: |
Contact Sales |
This is a stand-alone antenna that can be positioned inside any wireless device.
WPANT30005-SA
Datasheet (PDF)
| Style: |
Whip, Monopole, or helical |
| Frequency: |
2.4 – 2.5 GHz |
| Efficiency: |
80-90% |
| Peak Gain: |
2.5 – 4 dBi |
| Radiation Pattern: |
Omni Directional |
| Antenna Size: |
80mm X 10mm (dia) |
| Connector: |
Reverse polarity SMA male |
| Antenna Position on the device: |
Any Position |
| Price & Application Support: |
Contact Sales |
Extremely Efficient & Screw on Mount.
WPANTDP011
Datasheet (PDF)
| Style: |
Stubby Antenna -Omni directional |
| Frequency: |
2.4 – 2.485 GHz |
| Efficiency: |
80 – 90% |
| Peak Gain: |
4 dBi |
| Antenna Size: |
196mm (Length) X 13mm (Dia) |
| Connector: |
SMA Male |
| Price & Application Support: |
Contact Sales |
A 2.4 GHz ISM band Omni-Directional Whip Antenna with SMA Male connector that has a swivel mechanism.
WPANTDP012
Datasheet (PDF)
| Style: |
Stubby Antenna -Omni directional |
| Frequency: |
2.4 – 2.485 GHz |
| Efficiency: |
80 – 90% |
| Peak Gain: |
4 dBi |
| Antenna Size: |
196mm (Length) X 13mm (Dia) |
| Connector: |
SMA Female |
| Price & Application Support: |
Contact Sales |
A 2.4 GHz ISM band Omni-Directional Whip Antenna with SMA Female connector that has a swivel mechanism.
WPANTDP020
Datasheet (PDF)
| Style: |
Stubby Antenna -Omni directional |
| Frequency: |
2.4 – 2.485 GHz |
| Efficiency: |
80 – 90% |
| Peak Gain: |
4 dBi |
| Antenna Size: |
196mm (Length) X 13mm (Dia) |
| Connector: |
TNC Male |
| Price & Application Support: |
Contact Sales |
A 2.4 GHz ISM band Omni-Directional Whip Antenna with TNC Male connector that has a swivel mechanism.
WPANTDP023
Datasheet (PDF)
| Style: |
Stubby Antenna -Omni directional |
| Frequency: |
2.4 – 2.485 GHz |
| Efficiency: |
80 – 90% |
| Peak Gain: |
4 dBi |
| Antenna Size: |
196mm (Length) X 13mm (Dia) |
| Connector: |
TNC Female |
| Price & Application Support: |
Contact Sales |
A 2.4 GHz ISM band Omni-Directional Whip Antenna with TNC Female connector that has a swivel mechanism.
WPANTDP010
Datasheet (PDF)
| Style: |
Stubby Antenna -Omni directional |
| Frequency: |
2.4 – 2.5 GHz & 4.9 – 5.85 GHz |
| Efficiency: |
70% (2.45 GHz), 60 – 70% (5.4 GHz) |
| Peak Gain: |
2 dBi (2.45 GHz), 4 dBi (5.4 GHz) |
| Antenna Size: |
197mm (Length) X 13mm (Dia) |
| Connector: |
Reverse Polarity SMA Male |
| Price & Application Support: |
Contact Sales |
A 2.4 GHz & 5 GHz Dipole Antenna with RP-SMA Connector that has a swivel mechanism.
WPANT30003-CC
Datasheet (PDF)
| Style: |
Body-Mount |
| Frequency: |
902 – 928 MHz & 2.4 – 2.5 GHz |
| Efficiency: |
365 – 80% (915 MHz), 65 – 70% (2.45 GHz) |
| Peak Gain: |
1.8 dBi (915 MHz), 2.5 – 3 dBi (2.45 GHz) |
| Radiation Pattern: |
Omni Directional |
| Antenna Size: |
76mm X 30mm X 30mm |
| Connector: |
Type-N Female Jack with a Flat end |
| Antenna Position on the device: |
Any Position |
| Application: |
Should be mounted to a metal surface |
| Price & Application Support: |
Contact Sales |
Efficient Dual band operation, Compact Size and Impressive Performance are the key features of this Proprietary Design.
WPANT30009-CC
Datasheet (PDF)
| Style: |
True-Omni Connector/Body Mount |
| Frequency: |
902 – 928 MHz & 2.4 – 2.5 GHz |
| Efficiency: |
90% (915 MHz), 80% (2.45 GHz) |
| Peak Gain: |
1.8 – 2 dBi (915 MHz), 3.8 – 4.2 dBi (2.45 GHz) |
| Radiation Pattern: |
Perfect Omni Directional |
| Antenna Size: |
218.6mm X 69mm X 69mm |
| Connector: |
Type-N Male (also serves the purpose of mount) |
| Antenna Position on the device: |
Placement independent |
| Application: |
Should be mounted to a metal surface |
| Price & Application Support: |
Contact Sales |
Highly Efficient, 2 dBi True-Omnidirectional Antenna that can be used by any repeater system in the ISM bands in order to maximize the Coverage Radius.
WPANT30008-CE
Datasheet (PDF)
| Style: |
True-Omni Connector/Body Mount |
| Frequency: |
902 – 928 MHz & 2.4 – 2.5 GHz |
| Efficiency: |
80% (915 MHz), 65 – 75% (2.45 GHz) |
| Peak Gain: |
3 dBi (915 MHz), 3.5 dBi (2.45 GHz) |
| Radiation Pattern: |
Perfect Omni Directional |
| Antenna Size: |
349mm X 69mm X 69mm |
| Connector: |
Type-N Male (also serves the purpose of mount) |
| Antenna Position on the device: |
Placement independent |
| Application: |
Should be mounted to a metal surface |
| Price & Application Support: |
Contact Sales |
Highly Efficient Dual-Band, 3 dBi True-Omnidirectional Antenna that can be used by any repeater system in the ISM bands in order to maximize the Coverage Radius.
WPANT30018-SA
Datasheet (PDF)
| Style: |
Body-Mount |
| Frequency: |
902 – 928 MHz & 2.4 – 2.485 GHz |
| Efficiency: |
90% (915 MHz), 65% (2.45 GHz) |
| Peak Gain: |
3.2 dBi (915 MHz), 4.0 dBi (2.45 GHz) |
| Radiation Pattern: |
Omni Directional |
| Antenna Size: |
81mm X 30mm X 30mm |
| Cable Length: |
178mm (7 inches) |
| Connector: |
Right angle SMA Male |
| Mount: |
Threaded Metal Mount with 2 flat edges |
| Antenna Position on the device: |
Any Position |
| Application: |
Should be mounted to a metal surface |
| Price & Application Support: |
Contact Sales |
Extremely Efficient Dual band operation, Low cost, Small size & Ease of integration are the key features of this Proprietary design.
WPANT30015-SA
Datasheet (PDF)
| Style: |
Surface Independent Body-Mount |
| Frequency: |
902 – 928 MHz & 2.4 – 2.5 GHz |
| Efficiency: |
55 – 80% (915 MHz), 55 – 80% (2.45 GHz) |
| Peak Gain: |
1.5 – 2.5 dBi (915 MHz), 3 – 4.5 dBi (2.45 GHz) |
| Antenna Size: |
95mm X 60mm X 14mm |
| Cable Length: |
1 meter (39.34 inches) |
| Connector: |
SMA Male |
| Antenna Position on Board: |
Along the edges of the device |
| Price & Application Support: |
Contact Sales |
High performance, Industrial grade, Surface independent antenna. It can be configured with different Cable / Connector styles & lengths.
WPANT30014-CA
Datasheet (PDF)
| Style: |
Surface Independent Body-Mount |
| Frequency: |
870 – 874 MHz & 2.4 – 2.5 GHz |
| Efficiency: |
55 – 80% (872 MHz), 55 – 80% (2.45 GHz) |
| Peak Gain: |
1.5 – 2.5 dBi (872 MHz), 3 – 4.5 dBi (2.45 GHz) |
| Antenna Size: |
95mm X 60mm X 14mm |
| Cable Length: |
1.5 meters (59 inches) |
| Connector: |
SMA Male |
| Antenna Position on Board: |
Along the edges of the device |
| Price & Application Support: |
Contact Sales |
High performance, Industrial grade, Surface independent antenna. It can be configured with different Cable / Connector styles & lengths.
WPANT30019-SA
Datasheet (PDF)
| Style: |
True-Omni Body-Mount |
| Frequency: |
902 – 928 MHz & 2.4 – 2.5 GHz |
| Efficiency: |
90% (915 MHz), 80% (2.45 GHz) |
| Peak Gain: |
2 dBi (915 MHz), 2.5 dBi (2.45 GHz) |
| Radiation Pattern: |
Omni Directional |
| Antenna Size: |
218.6mm X 69mm X 69mm |
| Cable Length: |
178mm (7 inches) |
| Connector: |
Right angle SMA Male |
| Mount: |
Threaded Metal Mount with 2 flat edges |
| Antenna Position on the device: |
Placement Independent |
| Price & Application Support: |
Contact Sales |
Highly Efficient, 2 dBi True-Omnidirectional Antenna that can be used by any repeater system in the ISM band in order to maximize the Coverage Radius.
